Provided by: Corsair
No compensation was received for review of this product.
Price: $59.99 USD (MSRP)
With an MSRP of $59.99 USD, the Corsair 200R Mid Tower is in the budget category of computer cases.
Corsair has designed a solid mid tower case with the Carbide Series 200R. I would consider the styling classic but the functionality is excellent. Corsair has combined budget pricing with features and quality that you would find on a more expensive case. The steel of the case is stiff and is painted with a black finish that does not scratch easily. The front bezel is made out of ABS plastic and is nice and thick, so there is no need to worry about parts breaking on it. Both of the side panels come on and off the case easily with the use of thumb screws. Size wise, the 200R is an average mid tower and is relatively light.
The 200R does very well with cable management. There is space behind the motherboard tray for the cables that a typical system would have. It is necessary to be neat to allow the side panel to close easily, but the 200R has tie down points in the right locations to secure your wiring. The cable routing holes are placed in the proper locations to run the necessary wiring behind the motherboard tray, however there are no rubber grommets on them to hide the cabling. The front panel USB 3.0 cables are also flat allowing for better flexibility and cable routing, as this header tends to be thick and take up a lot of room in most builds.
The cooling system in the 200R consists of one 120mm intake fan in the front of the chassis and one 120mm exhaust fan located in the rear. The stock cooling works well enough, but if you have the desire to add additional fans, you can add up to six more fans. You have a 120mm fan mount in the front, two 120mm/140mm fan mounts on the side panel, two 120mm/140mm fan mounts on the top, and one 120/140mm fan mount on the bottom of the case. There is also ventilation below the PSU and dust filters on the front and PSU intakes. Corsair includes fan screws for all additional mounting locations and rubber grommets to reduce the vibration of the fans.
Installing drives into the system is extremely easy, thanks to the tool-less bays. 5.25” drives are able to be installed easily, though you do need to pull the front bezel off to take the blank drive bay cover out easily. You would need to use screws if you were installing a short device such as a fan controller that only had one set of screw holes, since the tool less hold down sits in the back two screw holes. The case has four 2.5” drive bays that are also tool less, the drives simply slide into the slots on and clip into place. There are screws provided if you want to secure the drives further, though it is not necessary. There are also four 3.5” hard drive bays that install in the same fashion. One thing that is nice is no screws or brackets are required to install the hard drive.
The performance of the Corsair 200R was well within range for a mid tower case. The stock fans provide enough airflow to keep the system cool and the front intake fan blows directly onto the GPU. Considering that the GPU being used was an older model that heats up more than modern day GPUs, the direct airflow to it worked very well. Additional fans would certainly increase the performance and there are plenty of locations to mount them. The stock fans were also relatively quiet, even while the system was under load.
The Corsair Carbide Series 200R mid tower is a great choice for those who are looking for a budget chassis. Corsair includes some higher end features, such as the rubber grommets on the fan mounts to reduce the vibration, and the dust filters on the intakes. There are plenty of options for adding additional cooling and space for the average system. The 200R earns a Gold award for its budget pricing, build quality, and ease of installation.